Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 03-24-2018, 02:12 PM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
Quote:
Originally Posted by robert1 View Post
This is where the method of *Process Of Elimination* comes in handy. What i would suggest is to disconnect what is connected to pin 2 on V7 (6SQ7) & then power up the set & see if you still have hum. there should be silence. if the hum stops, You can eliminate the audio amp & output stage as being the problem. the problem then, would be somewhere upstream in the I.F. or in the audio detector stages. If the hum is still there, there is a problem with the source voltage from the B++ rail that supplies the audio amp stage.

Are you sure that the hum is a 60 cycle ripple, & not a buzz caused by sync pulses?
Well it sure does sound like 60 hz it's sure loud enough and don't sound like a buzz but rather 60 hz .
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:14 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.