![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
Can you turn the brite down ? Is the vert fuse OK? IIRC 6/10 amp. Whats the chassis # ? 73 Zeno ![]() LFOD ! |
|
#2
|
||||
|
||||
|
That makes me feel less incompetent at least. Only two fuses I can find in the set are good. Controls effect nothing. Chassis 13JC10
|
|
#3
|
||||
|
||||
|
13GC10, 13HC10, 13J10, 13KC10 all almost the same set.
Basically a console chassis stuffed in a 13" set ! AND they kept it serviceable...... I got the 1st one that came in (13GC10) a real sweet set. Unpacked it & loved it so much it was soon on the seat of my Toronado for the ride home. 1) Check the 9-88-? video module for cold joints under the white resistor pack. 2) On CRT module check voltage on collector (C) of one of the video outputs. 3) Each video out on CRT socket the C goes to identical resistors. Typically about 15K ohm 2 watt. Where they all join at one end measure that also. 4) See what happens if you turn down the G-2 ( A.K.A. screen) on the CRT board, return it to back after. That should narrow things down. 73 Zeno ![]() LFOD ! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|