Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 03-16-2018, 07:09 PM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
Quote:
Originally Posted by dieseljeep View Post
A hum at minimum volume usually indicates power supply hum or AC ripple getting into the B+. Disconnect the speaker and with an 8 ohm or so dummy load, signal trace the audio circuit to see where the hum originates.
I'm not to sure what your saying by disconnect the speaker and trace. I do have 470m b- to chassis but there has to be another way to track this down. Different tubes nothing works and the chassis grounds at the tubes are super clean and soldered . Should there be voltage from chassis to b- , because I'm getting about 239 Vdc at those points.

Last edited by timmy; 03-16-2018 at 07:13 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.