![]() |
|
|
|
#1
|
||||
|
||||
|
This guy: https://www.thevoiceofmusic.com/
If you can't find the part then perhaps you can put the original back into shape or fabricate another. I have a high-end Admiral tube stereo portable changer where the tonearm is plastic...The back where it connects to the pivot was mashed up, but I was able to piece it back together such that it works like new and unless taken apart and scrutinized is indistinguishable from factory...Only thing that sucks about that changer is that the LP styli chipped off and I can't source a replacement (Twas a great sounding unit when the styli was still there).
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#2
|
||||
|
||||
|
Quote:
a cartridge with the same color connector. They are just glued into the head shell & pop out easy. We ended up just stocking a few needles for them. Only a few covered hundreds of them. Most differences were flipper arm length, 33-78, 33-33, one siders etc.... 73 Zeno ![]() LFOD ! |
|
#3
|
||||
|
||||
|
Quote:
I've soldered it back together, but it won't take the pressure. If it were a bog-standard VM changer, I wouldn't sweat it....but you just don't see too many of these Zenith built belt/idler drive changers with the cobra style tone arm. I think 1961 was pretty much the only year for them and 1962 brought the micro-touch 2G style arms. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|