Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 01-02-2018, 01:08 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
That is probably smearing or ringing.
Did it do it before the alignment?
If so have you tested your RF signal source with another CRT TV that is known to work and confirmed there is no smearing in the signal source?
If not can you put the adjustments back?

Have you tried the fine tuning adjustment?

On vintage TVs it is best NOT to align the video IF (and to an extent the tuner) unless they are not allowing a reasonably good picture. It takes a good deal of skill, experience and calibrated signal generation equipment to make an improvement on the original alignment.

Does your set have a DC restoration circuit or DC coupled video circuits between the detector and CRT? Sets that lack DC video coupling and restoration sometimes have a certain degree of smearing on sharp monochrome transitions by design...We get used to modern color TVs that have all have DC restoration and forget what it looks like on monochrome sets where it was not considered a standard design requirement.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.