![]() |
|
#11
|
||||
|
||||
|
There are 2 power supplies. One is always on & supplies
the micro & on/off relay ( if it has one.). Second one supplies B+ for horz/HV. Its on/off is via a relay or other method. You will need a schematic for at least the power supplies to check them & see if one isnt working. Use care changing the IC's the board is double sided & you will probably lift some top etch. If you have very small dikes you can try nipping off the IC pins & saving the etch. Otherwise you will need jumpers. We were a authorized Sony dealer / warranty station at that time. Never seen a bulletin on the problem & Sony TA changed the subject ! It was common, I had the 30" & went through 3 sets in abt 5 yrs. Shame of it is the 30 & 34" widescreens were the best CRT sets ever made pix wise. good luck Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|