Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 08-21-2017, 07:19 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by Adam View Post
The Zenith VR300... picture gets vertically jittery sometimes. It will usually go away by itself in less than a minute, or if I rotate the tracking control back and forth.
Probably the entry and/or exit tape guide rollers need a tweak. Those sometimes come loose even with the tiny hex set-screw they have.

If you dare, you can try and do that without an o'scope. If you do have a scope you would need the service manual to find the test points to hook up to. Start by marking the metal tops of the guide rollers toward the front with a mark from a felt tipped pen so you can get back where you started. Then play a known good tape and adjust the tracking control until the picture is noisy. If there's more noise at the top of the picture adjust the left tape entry guide next to the drum. If there's more at the bottom adjust the opposite right exit guide. Go back and forth until it's equal noise top to bottom as you adjust either side of the tracking control.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:57 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.