Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 08-10-2017, 11:14 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Electronic M View Post
Heck of a lot to respond to there....

Quick hum diagnosis tip. If you can disconnect the B+ with a lytic still in circuit giving a couple secs B+, but keep the heaters going on AC if the hum persists when the B+ is disconnected from AC that indicates heater/line cord hum leakage (or perhaps field coil issues if it does not use a PM speaker).

If hum seems to be in the heater circuit try unplugging the set and see if it hums for the second or two it runs with the plug pulled.

Standby usually cuts off B+ while leaving heaters on. If audio/hum persists in standby then there is something wrong with the standby mode.
There could be a H-K short in one of the tubes.
The circuitry is the same as the earlier Hallicrafters models, except for the rectifier circuit and heater drop. The year earlier models used a 35W4. Why they did it that way is anyones guess! It couldn't have been a cost savings.
The Hallicrafters sets of this type were very insensitive on the high band.
IIRC, in that model, the standby switch will only cut the B+ to the plates and screens of the converter and IF tubes.
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:30 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.