![]() |
|
#5
|
||||
|
||||
|
Center convergence is way off.
Do this to rough it in. Dark room, color all the way DOWN. Brite & contrast about 2/3. Dot pattern, Adjust the 3 conv magnets & 1 blue lateral ( not the rings) to bring the dots together in the center ONLY. The edges will fall into place much better then. After you do this a few times & it "clicks" you wont need a generator, you can do it by eye quicker. The set probably needs a by the book set-up but this will get you to the point to trouble shoot any other problems. 73 Zeno ![]() LFOD ! |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|