![]() |
|
|
|
#1
|
||||
|
||||
|
[QUOTE=jr_tech;3187609]If it were really running too fast I think you would see stretched images... these are narrow and overlapped IMHO, the sweep is running too slow.
![]() Thank You jr_tech , that is an interesting consideration , I didn't give a thought to the possibility of it being too slow . I now also wonder if the interlaced scanning also plays a part , could it possibly have been running at half speed to have been producing the 4 images ? |
|
#2
|
||||
|
||||
|
[QUOTE=init4fun;3187626]
Quote:
![]() Could not get the set down to half speed, but i'm guessing we would see 2 non-overlapping images. ![]() jr |
|
#3
|
||||
|
||||
|
[QUOTE=jr_tech;3187681]
Quote:
a tune as well. I can no longer hear frequencies that high, and when the Emerson I worked on a year ago drove my daughter bats......Clue! Horizontal is running too slow....two caps and tube later, and she was well again. Sadly, the tuner has failed mechanically - the plastic holding the tuner strips in has dry cracked - I've got her stuck on channel 4 for now.
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|