Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 08-04-2017, 12:16 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Here's the schematic for his Horizontal Oscillator.

First check the slug is moving within L500.

I was off a few uFds- the .0068uf (C507) swamping the coil, along with the .022uF (C508) would be my first swaps.

If you have a scope, you can follow the horizontal sync and oscillator waveforms right down the line - just make sure either the scope or the TV is on an isolation transformer - the hot chassis is a problem.

Doug Harmon posted about his TS-454 (same chassis electrically, laid out a bit differently) - his shows those putrid TRW burgundy caps that like to open. All the more reason I think you'll find a cap or two, possibly a resistor to be the culprit.

BTW, the same Horizontal oscillator is used in the TS914 and possibly other Motorola Color Chassis:

http://www.americanradiohistory.com/...-Page-0033.pdf
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!

Last edited by Findm-Keepm; 09-29-2017 at 06:39 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:02 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.