Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 07-26-2017, 08:06 AM
sean's Avatar
sean sean is offline
VideoKarma Member
 
Join Date: Feb 2004
Location: Sullivan, MO
Posts: 271
Ben,

I had a 48-482 that I restored and used on my desk at work where reception is poor (especially AM). I had no problems pulling in FM stations and could pull in a lot of AM stations as well. The audio quality of FM isn't as good as some later FM sets (I used to have a Grundig on my desk that had great audio) but it's OK.

The FM-1000 detector can be a little finicky. Follow the alignment instructions carefully and you will be fine. I do remember after using the set for quite a while the FM quit. It turned out 47k resistor in the plate supply for the FM-1000 failed. I think this was a 1/2 watt unit originally and is dissipating at least that much. I replaced it with a 1 watt unit and didn't have a problem afterward.

There are about 30 paper and electrolytic capacitors in that radio so there will be a bit of work to get them all replaced. Some are also a bit difficult to get at. I eventually took mine off of my desk just to get a little more room. It is a big set.
__________________
Sean - WØKPX
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:48 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.