![]() |
|
#13
|
||||
|
||||
|
Quote:
It might be long enough (and then some) for FM broadcast, but I would and do wonder about 2m; after all, a quarter wavelength at 144 MHz is somewhere in the neighborhood of 19 inches. I have a difficult time figuring out how the 3/8-wave telescoping antenna I'm using with my Icom HT works as well as it does, as that antenna is far longer than 19 inches when fully extended. As I mentioned in an earlier post, the stock antenna that comes with the UV5R isn't much good unless you are almost literally within spitting distance of a local repeater, and it doesn't work worth a hill of beans on FM broadcast unless you are in a very strong signal area. That lets me out, since I live about 1.5 to 2 miles from the so-called "local" machine in the next town south of here, and am about 45 miles (!) from most FM radio stations serving Cleveland. I cannot seem to hit the local repeater with my UV5R, although I can with my 1.5-watt Icom IC-T22A. There are some settings on my UV5R HT which I know aren't right yet, such as the transmit offset (currently set at 0.000 [simplex] rather than 0.600, IIRC) and the CTCSS tone, which is presently set to off. The HT's transmitter appears to be working, however, as I have tried it on 146.52 simplex and can hear myself in the Icom HT as nicely as you please. Therefore, the problem with transmitting to and hitting repeaters with the UV-5R must be caused by one of two things: that I don't have the CTCSS (PL) tone set properly, that the transmit offset is incorrect, or possibly both settings are set to 0 or off. The programming procedure for this HT isn't exactly straightforward (far from it, in fact), so I must be missing or skipping a step or two somewhere.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
| Thread Tools | |
| Display Modes | |
|
|