Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 06-26-2017, 11:52 AM
kf4rca kf4rca is offline
VideoKarma Member
 
Join Date: Feb 2015
Location: Atlanta
Posts: 970
You can also uses the A gate for testing coaxial cable. You loop the pulse output thru the vertical input with a tee. Put a 100 ohm pot on the end of the line. Rock the pot back and forth and observe the waveform. You will see the reflected pulse go up and down, but when it flattens out, a match is achieved. Now remove the pot and measure the resistance which is equal to the impedance of the coax.
This method also shows also shows discontinuities such as splices and kinks that would create a reflection.
In the old days, TV engineers would use this method to "look" at the transmission line going up to the antenna, particularly after a nasty lightning hit.
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:55 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.