Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-10-2017, 07:38 AM
toxcrusadr's Avatar
toxcrusadr toxcrusadr is offline
VideoKarma Member
 
Join Date: Apr 2005
Location: Central Missouri
Posts: 314
Thanks for all the posts guys.

Yes there is cable available as I said in the original post but it is specific to her building I believe and she has shut it off to cut expenses.

Off on a tangent, but where I live there is NO analog signal left on the cable at all. You have to get some kind of converter box even for basic cable.

It is an older set, probably 2009 or something, but a good quality Sony Bravia.

I know she is very close to the antennas, looks like 1-3 miles for these stations. It may be the building or maybe they are firing over her head. But she is up on the 12th floor so I would think a 1 megawatt flamethrower (which a couple of these are) ought to have some signal strength.

The new antenna is supposed to be 40 miles range and it is pointed roughly in the right direction.

The fact that some OTA stations are received and others are SNOW (not 'no signal' as is normal with weak digital signals) is very odd. But we still need to try switching the signal type in the setup menu. I will report back on that.

I also have her asking around in the building to see if anyone else is using an antenna.
__________________
Summer's here and the time is right.
Reply With Quote
  #2  
Old 05-10-2017, 07:46 AM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by toxcrusadr View Post

It is an older set, probably 2009 or something, but a good quality Sony Bravia.


The fact that some OTA stations are received and others are SNOW (not 'no signal' as is normal with weak digital signals) is very odd. But we still need to try switching the signal type in the setup menu..
I have a similar age Sony Bravia, and it does not require any menu setup (other than to scan for channels) to switch between analog and digital. It finds the analogs and the digitals and should say how many it found when the scan mode ends. Pretty simple. If the tuned channel has a number displayed like "5" that's analog. A "5.1" would be the digital version. I never see snow on a digital channel. "No Signal" message will appear on a dead digital channel. Tune to a dead analog channel, gray snow just like in the olden days.
Reply With Quote
  #3  
Old 05-10-2017, 09:22 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
I have a Sony Bravia abt 6 yrs old. When you scan for channels
the set tries both NTSC & digital on each channel then notes them
for scanning. There are 2 MAJOR flaws in the software that other sets
had. I dont know how anyone could be so stupid to make it this way.
1) the only way to add a channel after moving the antenna was to
run another scan. Trouble is it overwrote the old scan.
2) you could not enter a "real" channel # then add it to the
channel scan list like old sets. You also couldnt move the antenna
around to find the sweet spot that worked.
One thing you WILL need is the real owners manual, often the size of the Bible.

The CATV switch may be just for CATV "types" Normal- HRC-IRC & shouldnt
have effect.
The sky scraper its in is also acting like a huge Faraday cage with all
its rebar. Especially UHF that loves to bounce around & give multy paths.
Even on NTSC UHF could be problems especially in town. Look at the
brighter side. In an EMP attack a lot of stuff will probably survive.........
IMHO CATV may be the only option unless there is a balcony for
a SAT dish.

73 Zeno
LFOD !
Reply With Quote
  #4  
Old 05-10-2017, 09:43 AM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Just looked at my Sony, in the menu-"Channel" then "Signal Type Cable/Antenna" selector as the first step. You can either "auto-program" or "add digital channels". Not much to it.

I had pretty much forgotten the TV settings since I use a DTVPal DVR for my OTA tuning, time shifting and commercial fast-forwarding, plugged in to the TV's HDMI. Rarely use the TV's tuner.
Reply With Quote
  #5  
Old 05-10-2017, 04:05 PM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is online now
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
In New Orleans we have Cox cable. About a year ago they stopped all digital and analog cable that flat screen TV's could receive/decode.
They issued the dreaded "mini-box" that has an analog RF out (channel 3 or 4) to feed older TV's and HDMI for newer ones. No composite or left/right audio. I have installed many of these and out of the box failure is high (and frustrating)!
From what I have learned they have two of the boxes, made by different manufacturers.
So far, I have a Funai (Emerson) 32 inch LCD that has the most useful tuner yet! It allows direct access and when a working channel is entered, it shows it, gives a picture then remaps the number.
When there were both analog and digital OTA TV's with digital (ATSC) tuners would get both. OTA boxes only get digital.
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:26 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.