Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > General Off Topic Forums

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-11-2017, 09:42 AM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,871
I used to always buy radio shack contact cleaner, but the last can was garbage. Now use MG chemicals products.
Reply With Quote
  #2  
Old 04-11-2017, 05:56 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by maxhifi View Post
I used to always buy radio shack contact cleaner, but the last can was garbage. Now use MG chemicals products.
I had a can of DeOxit D5 one time but didn't like it because it is so oily. I just got a big can of MG Chemicals Electrosolve and tried it on my Sanyo's VHF tuner, fixed it right up. I tried Radio Shack's trash on it a while ago which made no appreciable difference. Before the Electrosolve treatment I couldn't keep it locked on a signal.

Seems Electrosolve is basically a purer form of Nu-Trol; no lubricating agent I know of so it doesn't leave oily crap everywhere. It's far cheaper too, and my can was about half the price of what Amazon has. It's popular stuff, there were no big cans left on the shelf at Jentronics, someone had to go into the stockroom to get more.

I also sprayed the tuner and just about every chassis connection in My Electrohome just for good measure. Next up are my receiver and oscilloscope.

Last edited by Jon A.; 04-12-2017 at 12:35 AM.
Reply With Quote
  #3  
Old 04-11-2017, 11:41 PM
centralradio centralradio is offline
VideoKarma Member
 
Join Date: Feb 2014
Posts: 1,097
I know a guy that used WD40 on controls and tuners..Is that a degreaser and screw up some plastics.

I remember getting in sets and see green stuff around the controls and tuner.I use to know what the stuff used and now draw a blank.
Reply With Quote
  #4  
Old 04-12-2017, 07:24 AM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
dup

Last edited by Ed in Tx; 04-12-2017 at 07:29 AM.
Reply With Quote
  #5  
Old 04-12-2017, 07:29 AM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by centralradio View Post

I remember getting in sets and see green stuff around the controls and tuner.I use to know what the stuff used and now draw a blank.
I remember some Blue Stuff I think it was called that was abrasive and you were supposed to follow up cleaning that out with the Blue Shower cleaner. Quite messy.
Reply With Quote
Audiokarma
  #6  
Old 04-12-2017, 02:49 PM
centralradio centralradio is offline
VideoKarma Member
 
Join Date: Feb 2014
Posts: 1,097
Quote:
Originally Posted by Titan1a View Post
NEVER, NEVER, NEVER use WD-40 on contacts! It leaves deposits that will gum up contacts.
Thanks.Thats what I figure.


Quote:
Originally Posted by Ed in Tx View Post
I remember some Blue Stuff I think it was called that was abrasive and you were supposed to follow up cleaning that out with the Blue Shower cleaner. Quite messy.
Maybe thats what it was.It looked greasy to me.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:32 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.