Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 03-19-2017, 07:06 PM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
Ok, all the hv caps are new and still don't have verticle this set is beginning to remind me of the silvertone. Any ideas what may be going on here. It's like it's rolling so much the screen just collapsed. There are 2 caps at the 6sl7, a 100 mmf and a 250 mmf I subbed those as well even tried another .004 cap at the 6sl7 also checked both vert size and hold pots both good 5 meg . There are no resistors that are bad I went over them clipping one leg to be sure. The 6.8 Meg's at the 6sl7 are up Alittle 7.5 meg which my other sets were up around there as well. All the 2.2 meg resistors are good except one I changed. Tried other tubes no change. The b+ and b++ voltages are right on. All Micas in the verticle and horiz I changed one at a time to see if there was any difference from mica to mica still no change. So now I guess I'm looking for one of the pros here to tell me what I may or may not have done. When I first fired the set up for the first time it had vert hold but the pot was maxed to keep it from rolling I then turned it off for some reason or other came back to it and had this crazy verticle problem.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:17 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.