![]() |
|
#4
|
||||
|
||||
|
When one or two functions on ultrasonics fail, it is usually the remote - the rods corrode, the mounts deteriorate, or the striker has deformed. Got another remote to try? If not, take a close look at the rods and mounts in your remote. Post pix if you can - I've seen just a speck of encrusted dirt kill a function on the clicker remotes.
3/4ths of your remote receiver are known good if you have any functions working.
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
| Thread Tools | |
| Display Modes | |
|
|