Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 02-22-2017, 08:29 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by DavGoodlin View Post
I have two of these BK 467s, one from a shop closing and another from a swap meet. One has a dead filament supply and the other has G1 supply failure. both seem to have loads of cold solder joints.
That's probably what's wrong with my CR70 parts unit. It won't light the tube neck on any setting.

In my experience with test gear, taking a gamble on something that "powers on but is otherwise untested" usually pays off and is a very good bargain. It doesn't surprise me that the guy you got the B&K from was blowing smoke. No negative feedback from a swap meet.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.