Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-21-2017, 10:37 PM
MadMan's Avatar
MadMan MadMan is offline
The Resident Brony
 
Join Date: Oct 2016
Location: Chicago
Posts: 1,218
Beautiful set.

"30 tube chassis" - holy crap.

Um... have fun!
Reply With Quote
  #2  
Old 02-21-2017, 11:27 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Nice! That's a real cream puff. Luv the camo CRT coating. On the rare occasion we got a Fada in the shop, one of us goofballs would quip, "Here's da fadda. Where's da mudda?"
Reply With Quote
  #3  
Old 02-22-2017, 07:48 AM
Celt's Avatar
Celt Celt is offline
Peanut Head
 
Join Date: Nov 2002
Location: Paragould, Arkansas
Posts: 1,746
Quote:
Originally Posted by old_coot88 View Post
"Here's da fadda. Where's da mudda?"
Haw!
__________________

Let me live in the house beside the road and be a friend to man.
Reply With Quote
  #4  
Old 02-22-2017, 09:46 AM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
Nice score!
Reply With Quote
  #5  
Old 02-22-2017, 01:18 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
This set has 31 tubes, while later TVs from the '50s to the end of the tube era had far fewer tubes. This was due to the development of multi-section 7- and nine-pin miniature tubes that could perform two or more functions. These tubes were used extensively in small portables of the '60s, and I believe there was at least one set that had both video IF stages in one tube. Probably an inexpensive set designed for use in strong signal areas; I want to say like Muntz, but I don't think that company made portable TVs.

Combining the horizontal oscillator and AFC in one tube was popular in small, inexpensive portables of the '60s-'70s. I had several small portables that did in fact combine both functions in a single tube, and in fact my Kenco (Broadmoor) set, which I bought new in 1975, had a 38HE7 horizontal output-damper tube; my Sharp all-channel portable (both sets are long gone) also had such a tube, IIRC, in the same position.

Just goes to show how far TV had come since the late 1940s. My best guess is this Fada set required an outdoor antenna to work at all in most areas, since I'm sure most TV stations of the time were low-powered operations with, at most, a 15-20 mile range. This was for so-called "local" reception outside the suburbs; to get the stations at any distance from the transmitters, however, a high-power TV antenna on a tower was required. I remember in the '60s-'70s seeing large TV antennas on towers in the Akron, Ohio area, thirty miles from Cleveland; this was before high-power UHF stations and even before cable. I knew someone in the Canton, Ohio area (sixty-some miles from Cleveland) in the '70s who was able to get decent color TV reception from Cleveland stations using rabbit ears, but I believe this was an exception, not the rule, in those days.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
Audiokarma
  #6  
Old 02-27-2017, 11:12 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Jeffhs View Post
This set has 31 tubes, while later TVs from the '50s to the end of the tube era had far fewer tubes. This was due to the development of multi-section 7- and nine-pin miniature tubes that could perform two or more functions. These tubes were used extensively in small portables of the '60s, and I believe there was at least one set that had both video IF stages in one tube. Probably an inexpensive set designed for use in strong signal areas; I want to say like Muntz, but I don't think that company made portable TVs.

Combining the horizontal oscillator and AFC in one tube was popular in small, inexpensive portables of the '60s-'70s. I had several small portables that did in fact combine both functions in a single tube, and in fact my Kenco (Broadmoor) set, which I bought new in 1975, had a 38HE7 horizontal output-damper tube; my Sharp all-channel portable (both sets are long gone) also had such a tube, IIRC, in the same position.

Just goes to show how far TV had come since the late 1940s. My best guess is this Fada set required an outdoor antenna to work at all in most areas, since I'm sure most TV stations of the time were low-powered operations with, at most, a 15-20 mile range. This was for so-called "local" reception outside the suburbs; to get the stations at any distance from the transmitters, however, a high-power TV antenna on a tower was required. I remember in the '60s-'70s seeing large TV antennas on towers in the Akron, Ohio area, thirty miles from Cleveland; this was before high-power UHF stations and even before cable. I knew someone in the Canton, Ohio area (sixty-some miles from Cleveland) in the '70s who was able to get decent color TV reception from Cleveland stations using rabbit ears, but I believe this was an exception, not the rule, in those days.
It's funny, you should mention Kenco! They were sold at a short-lived Appliance and TV chain in the 70's, Kennedy and Cohen.
That little B&W TV was sold as a leader for $38.00.
Most people wouldn't get them repaired, as they were so inexpensive! I got several of them as freebees and they were easy to repair. They worked well and I sold them for close to what they sold for.
They also sold a 19" color table model for $188.00, that was a rebadged Sylvania Hybrid.
Reply With Quote
  #7  
Old 02-22-2017, 01:29 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Definitely an interesting design. I like it.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.