Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 02-21-2017, 09:29 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
This evening I reinstalled the yoke and CRT wiring. When hooking up the yellow CRT wire to a terminal strip, I found this. First off you know that I clean off all excess solder and old component leads. Then install the wiring and components. After cleaning off the terminal, I had what looked like a small ball of solder left. I tried to pry it loose, but that didn't work. Upon real close inspection, I saw that it was a clipped off lead soldered to the lower portion of the lug! I used some solder wick to free it from the lug. It was very close to the chassis, very close. I don't know if that was there before I messed with it or not. In any case I'm glad I found it!



Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.