Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 02-16-2017, 03:14 PM
Mre12ax7 Mre12ax7 is offline
VideoKarma Member
 
Join Date: Jul 2016
Posts: 51
The audio is working fine I hear static when the volume is turned up ( I made a mistake in my other post)
Voltage measurements: ( taken with Fluke 87, horiz, out plate cap off)
25L6
pin 8 159v Sams 150v
25BQ6
pin 4 136v Sams 135v
pin 5 -37v Sams -32
pin 8 0v Sams 0v (gnd)
6SN7
pin 1 -9 Sams -13 (varies with horiz, hold potentiometer could not get it any lower)
pin 2 182v Sams 135v
pin 5 197v Sams 175v
pin 6 6v Sams 6v
pin4 -.034v Sams -.3
Boost (measured at terminal 1 on flyback)
265v Sams 435v The plate cap is off of the output tube so that could affect that.

The plate voltage for the 6SN7 is way off. Is this related to the dropping resistor?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.