![]() |
|
|
|
#1
|
|||
|
|||
|
Wow, I didn't know you'd have to go all the way down to 56K. That'll be making the 12BY7 grid too positive, causing it to conduct, which you don't want. So scuttle that idea.
Maybe try the bias box further down the AGC line, as suggested earlier. This doesn't involve the 12BY7. What is the value of the resistor between Test Pt. B and the next test point (where the bias box would connect)? Last edited by old_coot88; 01-27-2017 at 10:53 PM. |
|
#2
|
|||
|
|||
|
Quote:
I removed the 56K from the 12BY7A tube. I don't have a bias box. Last edited by Crist Rigott; 01-27-2017 at 11:07 PM. |
|
#3
|
|||
|
|||
|
Bad info. Disregard.
Last edited by old_coot88; 01-27-2017 at 11:48 PM. Reason: Bad info |
|
#4
|
|||
|
|||
|
Quote:
Would doing this mod disable the contrast control? How would I know when the IF starts to overload? Sorry for all the questions but as you know I'm weak on the theory and how all the components work together. When you say take the 10K resistor to ground, you mean my B- rail? Thanks. |
|
#5
|
|||
|
|||
|
Sorry for the bad info. Senior moment
Please disregard.Try shorting the Test point/R10 junction directly to ground, and see if gain improves. If it overloads, use a resistor; start with a 1K, working upward in values like 10K, 47K etc until the overload condition diminishes. Last edited by old_coot88; 01-28-2017 at 12:08 AM. |
| Audiokarma |
|
#6
|
|||
|
|||
|
Quote:
|
|
#7
|
|||
|
|||
|
I have another thing that is a bit annoying. There is a very noticable "clicking" sound that varies with either the Vert. or Horiz. hold controls. It seems it is coming from the HV section, but tell for sure. I'm not sure it was there when I first got the TV going. It has been present for the last several weeks at least. Do I have something mis-adjusted? Any good way to find what the problem is or a way to eliminate it?
Thanks. |
|
#8
|
|||
|
|||
|
I think the sound is coming from the Vertical output transformer area.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|