Quote:
Originally Posted by Crist Rigott
When I jumper pin 1 to 3 & 9 contrast improves. Not a whole lot but an improvement.
When I short out R109 (with the jumper removed from pin 1 to 3 & 9), the contrast improves just barely.
Because the contrast pot is 5K, it doesn't take a lot of rotation to really change the contrast. BTW, with the contrast all the way up, I read 94 ohms from wiper to the pot end.
|
I jumpered a 3.3K resistor across the pot. This should give me 2K resistance and the rotation of the contrast pot is much better. I know it isn't linear, but very usable.