Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 01-21-2017, 07:16 PM
Zenith6S321's Avatar
Zenith6S321 Zenith6S321 is offline
VideoKarma Member
 
Join Date: Aug 2010
Location: Charleston, West Virginia
Posts: 303
The first picture is the spectrum of the B&K 415 RF output from about 38 to 49 MHz. Its varies about 3 dbV.

The second picture shows the downconverter output with a 20MHz sine wave to shift the 45.75 MHz sweep down to 25.75 MHz (45.75 - 20 = 25.75). Other harmonics show up, but the TV IF only amplifies its IF range signals (19.75-27.25 for this case). This downconverted output also varies by about 3 dbV.

If your old TV has a different IF range you calculate the value to enter into the sine wave generator by taking the 45.75 - your_TV_video_carrier_frequency = sine_wave_frequency. In the case of this TS721 its 45.75 - 25.75 = 20MHz.

The third picture shows the display of the B&K 415 scope XY outputs with the downconverter RF connected to an RCA 721TS tuner converter sweep input test point and with a direct probe (a scope probe set to 1X) connected to the video detector sweep test point. Yes, the B&K 415 markers all work since they are added by the B&K after the signal comes from the TV and the B&K then drives the scope H&V inputs.

The scope I am using is my new Digilent Analog Discovery USB scope. It's limited to a 50 MHz bandwidth, but it includes a bunch of features like a spectrum analyzer (FFT), a logic analyzer, an I2C and SPI serial protocol analyzer and a lot more. Here is a link if you are in the market:
http://www.digikey.com/en/product-hi...FRGBswodfAoO-Q
Be sure to get the BNC adapter as it expands the input frequency range when using scope probes instead of the fly-leads:
http://www.digikey.com/product-detai...073-ND/4840860
I thinks it's a great value for $280.

The fourth picture is the IF spectrum input to the video detector. It makes it easy to get the traps tuned to exactly 21.25MHz.
Attached Images
File Type: png B&K415-Output-Spectrum.png (78.7 KB, 38 views)
File Type: png B&K415-721TS-Sweep.png (86.7 KB, 32 views)
File Type: png B&K415-Output-Spectrum-721TS-DetectorIn-2.png (66.6 KB, 30 views)
File Type: png B&K415-20MHz-Mixer.png (71.2 KB, 29 views)

Last edited by Zenith6S321; 01-21-2017 at 07:23 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:52 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.