Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-19-2017, 12:30 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Findm-Keepm View Post
While you are waiting, get inside and replace the 20uF electro with a 22uF 100V cap, and swap out the high-megohm resistors in the grid circuit(s) - there should be a 5.6 Meg, a couple 10 Megs, and maybe one other high resistance IIRC. They greatly affect the accuracy. Dad's had drifted high - I never measured mine - just swapped them out with 2% 1/2W Corning metal film resistors (RCA used to package resistors like NTE, and that's what RCA used, Corning resistors...)


If you have some Deoxit cleaner, spray each socket and "exercise" them by plugging a tube in two or three times. Socket 11, 18 and a few others are/were heavily used - socket 11 being for triode-pentodes (6CG7, 6GH8, 6U8) and 18 for dual triodes (12AT7, 12AU7, 12AX7...). We used socket savers in both 11 and 18 on Dads. I killed his tester trying to test an 8LT8 - it wasn't listed, and I tried a combination that worked, but the tube tested low, so I jacked up the filament voltage to 10V, and cooked the power tranny. Dad had a B&K 747A, so the Sencore wasn't missed much (I think...).
I noticed The 'lytics and the 12AU7 tube. As of now, the meter wont electrically zero. I'll try the internal cal pot for now. I'm just going to put it back together until I get more information. I have too many projects started and not completed, one of my bad traits.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:53 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.