Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 01-16-2017, 02:43 PM
vts1134's Avatar
vts1134 vts1134 is offline
Looking For Time
 
Join Date: Apr 2011
Location: Pittsburgh, PA
Posts: 1,534
This set has three seperate chassis. The "main" chassis sits on the bottom of the cabinet and houses the tuner, video and audio IF, and the deflection circuits. The "vision" chassis lives inside the swivel box at the top of the cabinet. It houses the CRT and video circuits. Then there is a radio chassis that houses the radio as well as some of the controls for the TV.

Radio chassis:



Top of the vision chassis with 10FP4 CRT:



Main chassis:




I am about 85% of the way there with this one, I just need a gentle push to get it finished. I have recapped all three chassis and I'm down to just a few issues left to resolve.

1- The focus control is right up to the end of its adjustment in order to get a focused picture. I'm not sure where the CRT neck will fit in the focus coil when it's in the cabinet so it might not be enough adjustment.

2- The horizontal centering does not work.

3- There is an intermediate loud crackle or distortion that happens after the volume control.

4- There is an odd "zipper" interference in the video. You can see that interference here https://youtu.be/zgcznUOokvw.

I don't know which problem to tackle first.
__________________
John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.