![]() |
|
#26
|
||||
|
||||
|
What you need is horz drive from IC340 pin 11
That goes to the optic isolator IC469. VCC for IC340 pin 10 comes from T453 / D461 Hoz drive is a must have to run the PS. Since unloaded it seems to be doing what it should I would suspect over voltage shutdown. Maybe test the small transistors by lifting 2 leads for accuracy. BTW one of our distributors made up kits for these to fix them after lightning. Worked 100%. IIRC had an isolator, 4 small transistors & a diode. The similar C3 chassis had a lot of bad FBT's Symptoms were dead set, HOT gets too warm, R460/461 get warm. 73 Zeno LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|