![]() |
|
#2
|
||||
|
||||
|
I've explained this to many on here before.
Most schematics do not reflect all production changes a chassis under goes in the months or years that it is in production. It is not always easy to ascertain whether the schematic or chassis reflects the most recent/best revision. I recommend you stick with the values you find in your chassis unless you have reason to suspect they are not original/hack work. If after caps, resistors, tubes and adjustments the circuit one of the different parts is in refuses to work well, then try the schematic value.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|