Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-10-2017, 12:42 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Many of those GEs had a problem with the Hor. oscillator not starting because it's supplied from B Boost. The fix was to put a diode between the Boost source to the B+ line. That way, the H.osc starts on B+, then when the Boost comes up, the diode becomes reverse-biased and the osc. then runs on Boost.

I don't remember seeing this particular problem in the Admiral clones, though.

Another frequent problem in both GEs and Admirals was- someone would jam the back on without lining up the H.hold shaft with the hole, thus ripping the coil partway out of the circuit board.

Never seen the 33GY7 actually red-plate though, even under sustained absence of grid drive. Figgered this was due to the low B+ design.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.