Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 01-05-2017, 07:45 AM
Tony F Tony F is offline
VideoKarma Member
 
Join Date: Dec 2016
Posts: 156
Thanks Bob, I appreciate your expertise. I have gone through the set and checked every resistor and matched it up with the ones on the schematic. Most match, but not all. There are maybe 6 or 8 that seem to be way off in value. I don't mean the resistor changing value over time, but the color code not even matching the schematic. I take it, these were probably production changes and I should be replacing these with the value that is in there and not with the one shown on the schematic ? There are quite a few that have drifted as well. One thing I did notice is a small crack and what looks like carbon tracking on the damper tube socket (6DA4) between pins 5 and 6. That is looking down at the tube socket (from the top of the board) and counting clockwise from the first pin right of the keyway.
As far as I can tell, everything is original except for R54 (390 ohm) and cap C20 (.022 @400). They have been tacked on above board.
I like your idea of putting the electrolytics on top of the board rather than restuffing the cans.
Tony

Last edited by Tony F; 01-05-2017 at 07:46 AM. Reason: missed a word
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:03 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.