Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 12-21-2016, 05:08 PM
ZackN920's Avatar
ZackN920 ZackN920 is offline
VideoKarma Member
 
Join Date: Jul 2014
Location: Stephenson County, IL
Posts: 242
Ok, after some more work, I found that R41 and R42 (on the Audio Output tube) were way off, so I changed them and sound got a little better. All others directly connected to the AO were within range.

Started checking around the 5U8 sound IF. I found that it seems my sound IF coil is bad. I get no reading. It's not shorted, but I'm not sure if its completely open either. All I know is that its too high for my meter to read, and its only supposed to be at 4ohm's. It is though, still affecting sound. When I stick my allen wrench in to adjust, it picks up on it, and will make more static sounds. and If I mess with it, and move it from its current setting, it will kill the sound that I do get now out of the set.

I also noticed I need to figure out how to adjust the fine tuning. I get the best sound when the picture starts getting wavy and distorted. I get scratchy, static-e sound when I move it to get the best stable picture.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.