Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 12-15-2016, 09:34 AM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
When changing out that terminal strip, I decided to replace the components attached to it. When 1 lead went to a tube socket or ground and there was another component attached there as well it got replaced. I also changed the filament wires to my brown color code.

When I replaced the caps and resistors, I checked their values. Most were very close to what they were supposed to be. All the cap values checked good but a couple of the resistors were out of tolerance.

As my usual practice all film and electrolytic caps get replaced. With this done on the IF strip , I'm ready to resume with instruction sheet 2.



Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:01 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.