Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-01-2016, 01:12 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
I generally put up a crosshatch pattern and jump between the Height, lin and centering till I have a reasonably linear centered-ish picture. Compromise and incremental improvement can be the name of the game if it don't just fall into adjustment.

If the tube is good, generally resistors and caps are next, a check of the B+ and b+ Boost rail voltages feeding the circuit, and last the transformer and yoke.

For HV wire on normal sets I just find a big-screen 90's or newer CRT set at the curb, cut the donor set's HV lead at the fly, and unhook the cup from the CRT....That way I've got the lead and connector together.
Does your set have some kind of HV plug on the flyback end?...If so it could be difficult to properly change the HV lead without causing new problems.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.