|
|
|
#6
11-30-2016, 09:49 AM
|
||||
|
||||
|
Another note: Most lytics back then had -50%/+100% tolerance. The set won't care much if you put in a 20uF or an 80....
Higher = less hum, but higher B+ (with higher line voltage it could add to that and make B+ excessive). Lower=lower B+ (which can compensate for higher line voltage), but more hum. There are trade offs, but either way it should work.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode