Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-03-2016, 07:40 AM
CoogarXR's Avatar
CoogarXR CoogarXR is offline
VideoKarma Member
 
Join Date: Feb 2011
Posts: 641
You can't see it in that picture, but in the corner of that board there is a transformer for the CCFL inverter. Check the posts for cold solder joints. If that's not your problem, it will be eventually. I used to work on that model all the time, and when those solder joints fail, it will arc so bad, some times the board catches fire. I saw badly burned boards several times in that model and the 7603.

It's been a few years since I have worked on one, but I don't remember those big caps being a problem. Those plastic discs appear to bulge sometimes, but the caps themselves aren't bulged underneath. You can take that plastic disc off the top of the cap and look without hurting anything.

I know the Philips/Magnavox of that era did have bad caps, but it usually wasn't the big ones. It was usually the 1000uf, 2200uf, 220uf, etc, medium-sized ones.
Reply With Quote
  #2  
Old 11-03-2016, 12:19 PM
pac.attack76's Avatar
pac.attack76 pac.attack76 is offline
Stuck in the past
 
Join Date: Mar 2013
Location: Michigan
Posts: 1,311
Quote:
Originally Posted by CoogarXR View Post
You can't see it in that picture, but in the corner of that board there is a transformer for the CCFL inverter. Check the posts for cold solder joints. If that's not your problem, it will be eventually. I used to work on that model all the time, and when those solder joints fail, it will arc so bad, some times the board catches fire. I saw badly burned boards several times in that model and the 7603.

It's been a few years since I have worked on one, but I don't remember those big caps being a problem. Those plastic discs appear to bulge sometimes, but the caps themselves aren't bulged underneath. You can take that plastic disc off the top of the cap and look without hurting anything.

I know the Philips/Magnavox of that era did have bad caps, but it usually wasn't the big ones. It was usually the 1000uf, 2200uf, 220uf, etc, medium-sized ones.
Unfortunately, those two large ones failed. Very low readings on both, bottom bulging as well as top. They even messed up the plastic rear panel for the tv but you can't see it with out close examination. One of v the c as rattles when you shake it. I'll check the transformer as well. All my other caps look good.
__________________
Genesis does what Nintendon't
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:05 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.