Quote:
Originally Posted by bandersen
Dummy antenna is your hook up to the RF signal generator. Often you put a cap in series with the positive lead and ground the other. I'm thinking that by direct they mean you don't use a cap. It would be helpful to see the whole Sams section in question. You should be injecting your signal to an ungrounded shield over the converter tube.
|
Bob,
I did show the whole SAMS alignment section a few posts above.
Yes, I'm injecting the signal through an ungrounded shield over the converter tube and through a .01uf cap.
10-20-2016, 01:15 PM
Hybrid Mode
