![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
These are actually in two (close to twin designed) apartment buildings. For all the outlets they ran a black and a white. For the aerials, they ran blue and red. For the age, the wiring is in amazing shape. It isn't brittle at all and you can feel the rubber texture of the coating.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
#2
|
|||
|
|||
|
Quote:
Is the building wired in BX cable or knob & tube. Some areas used old style Romex without a ground, which had a woven cloth cover.
|
|
#3
|
||||
|
||||
|
Quote:
The buildings are BX cable with the rubberized wire. That's some pretty heavy conduit as it's steel. The wiring from the outside is on some massive sized wiring (not sure what gauge, but each handles 400 amps). There are some knob and tube in the attic, but it is stringing the wires for door bells and there's a central power supply behind a panel in the second floor hallway. The doorbells are long gone, but the wiring is still there. I found the transformer in the wall was still live, so I disconnected it. It's fun going through these old buildings. I found an empty bottle of bourbon in a dried puddle of plaster in the crawl space under one of the buildings. I was able to clean it off without too much damage to the label. I had a date of '38 on the bottom.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
#4
|
||||
|
||||
|
My coming here has brought me luck. I just purchased the following from ebay. I don't need the outlet, but the cover plate is an exact match for the original of the aerial plug and matches the wall switch and outlet cover plates. This is the first time I have found a cover plate that matches what is in the buildings. I guess that since switches get used regularly, the plates get damaged more often and are replaced. Too bad I haven't found any of those yet.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
#5
|
|||
|
|||
|
Quote:
Regarding the Mohican Relyon devices, I lived in two old homes that had them and they still held the plugs alright. I wasn't about to change them, as we didn't own the property. Many old homes had a built-in-the-wall ironing board and they always seemed to have a single receptacle nearby. ??? |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
This one had the lighted receptacle removed, but I'm trying to find a replacement.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
#7
|
|||
|
|||
|
Quote:
Good luck. |
|
#8
|
||||
|
||||
|
Quote:
I see there are two or three ReStore places around here. I wonder if they have items going back more than 10 or 20 years. Guess I'll have to make a trip or two and check them out.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
#9
|
||||
|
||||
|
Well the single outlet plate arrived today. A little cleaning and it was good to go. It looks good all together, but this picture shows I have a little more detail work to do on the receptacle. A couple of the letters and some of the grooves are still showing signs of paint. I really wish that cheap and fast paint jobs weren't the norm. They painted everything and doing that numerous times over the years leaves many layers to remove.
I once removed the cover plates before a paint job on a vacant apartment, only to come back afterwards to find they painted the darn outlets! Anyway, thanks for all the input and help.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|