Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 10-07-2016, 01:47 PM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,505
This worked for a 12RP4's trip from PA to Calgary

Kevin's method is it. I put the CRT in the same position, added 2-3 inches of bubble all around with bearing at the funnel, not close to the neck in any way.
A within a custom-constructed a wooden box glued and screwed!

before closing pack.jpg

I just sent a Zenith SS flat chassis and modules wrapped in a ton of bubble wrap and foam panels completely around the slightly oversized box.

It was delivered one state away by FedEx TOTALLY destroyed after being in their custody. Said member described damage consistent with a 9 ton truck running over it.


Shipping: $26

Value to VK member BEFORE shipped: Key to a Chroma-color Avanti restoration

Value to VK member AS delivered:
__________________
"When resistors increase in value, they're worthless"
-Dave G

Last edited by DavGoodlin; 10-07-2016 at 01:51 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:03 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.