Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-03-2016, 06:49 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
you can get test sockets for checking HO current, plug the socket in, the tube into the socked. It has test leads coming out that you hook the meter up to.

On mine I installed a small fuse holder with a 275ma fuse. Not sure I would bother doing that again, just something to make it easier to test really.

BTW there are LOTS of ideas on how to deal with 1st start ups. Some go with just plug in and watch for smoke to the more detailed monitoring of everything with very slow startup. Not saying there is a correct way, just different. IIRC the issues I ran into was some cracked solder joint on the color pcb where some high power resistors were. They stand off from the board quite a bit I presume to keep from cooking the pcb, you could tell they were a bit loose just by touching them. There were also some loose feeling sockets on some of the compactron tubes in that same area.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.