Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-30-2016, 08:29 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
Thanks Kevin.

I wired in the E-Cap cans and tacked in the 2 other E-Caps. I then carefully powered up the chassis. At 110V mains, I got 208V B+ ( 238 listed in Sams), and a raster. No audio though. Though the "hash" went up and down with the volume control. Looks like all the front panel controls did something. After about 2 minutes, I heard a "pop" from under the chassis. I quickly powered down and did a visual. Didn't see anything. So I powered it back up and still no audio and this time no raster. No HV either. So I shut it down till I can replace all the paper caps and such.

When looking this thing over when I first got it, I was amazed that there weren't any shorts because of the way the components were wired in. When replacing the caps and resistors, I do a complete and through job on lead dress.

I'm expecting my order from Just Radios to get here early next week.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:15 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.