![]() |
|
|
|
#1
|
||||
|
||||
|
Fixed the previous issue. I have a few more paper caps to replace which are values I didn't have on hand. Did a power to see where I'm at. Still pretty much the same when the old caps were still here. Didn't expect recapping to do much since that's not how it usually works.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) Last edited by SwizzyMan; 09-30-2016 at 07:16 PM. |
|
#2
|
||||
|
||||
|
Here is what I got. As you can see I have a nice black and white picture. But the color is a different story. There seems to be an absence of yellow and any purple colors. Rotating the Hue didnt do much and this was the best I could get it. I also have to turn up the color control about 3/4 of the way up to really get any color. And you can see i have that slow horizontal bending that almost looks like bad filters (all were replaced)when straight lines show up on the screen. I almost suspect that the crystal oscillator is actually bad.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
![]() |
| Thread Tools | |
| Display Modes | |
|
|