![]() |
|
#11
|
|||
|
|||
|
My E-Caps came in today so I decided to build them up.
I use hot glue to hold them together and some 600 volt solid wire for the leads. I color code each cap and make notes as to what cap, wire color, goes to each symbol. I want to match the originals. On the C2 which has only 3 caps, I used some balsa to from some spacers for the lower cap. This help stabilized the whole thing. The pics speak for themselves. Later tonight, I cut off the original cans, clean them and then the E-Cap re-stuffing will be finished and they'll be ready to install into the chassis. ![]() ![]() ![]()
Last edited by Crist Rigott; 12-03-2016 at 04:25 PM. |
| Thread Tools | |
| Display Modes | |
|
|