Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 09-28-2016, 09:08 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
I replaced the HV capacitor and made the repairs from trouble shooting the collapsed issue. It is working well now.

However all I can get out of the HV module is 3900-4000 volts. Anybody?

The HV module I'm talking about is the solid state one that is plugged into the 6V6GT (HV Osc.) socket. Then the HV wire from the module plugs into the 1B3GT socket. Pretty neat the way it works. No more HV collapse. Here is a link on the module:

http://www.myvintagetv.com/philco_hv.htm
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:11 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.