Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Expeditions & Passions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-27-2016, 09:28 AM
ChopperChas ChopperChas is offline
VideoKarma Member
 
Join Date: Jan 2009
Posts: 5
Yeah, the unit otherwise works, and there's no 120/240 switch on this unit. I've checked the transformer winding outputs and they're the correct voltage. I'll try disconnecting the wires from the VFD and see if they read the proper voltage then. Maybe the 1.3v is because of the load of the VFD. If the VFD cracked or leaked somehow would it still draw current even though nothing is displayed?

I'm assuming supplying 5v DC to the filaments for a second or so wouldn't be a good idea. I don't really have an AC power source that I can generate to test otherwise.

Hmm, I do have another cassette deck that I can temporarily swap the VFD out of. I can try that too.

Charles.

Last edited by ChopperChas; 09-27-2016 at 09:44 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.