Predicta Holiday - First power up attempt

[madlabs]

Not getting much time in this week. Got my new meter (Fluke 117). I fired the set up and noticed that the video output tube (6AW8A) is getting hot with a dull red plate. I don't believe it was like that previously. Looking at the voltage:

Pin 9 = -30 (negative 30?!, SHOULD BE +190v)
pin 8 = 180 (should be 140)
Pin 6 = 1.5, should be 1.2V

Haven't had time to check all the resistances. Any quick suspects?

Jonathan