![]() |
|
#6
|
||||
|
||||
|
Quote:
I removed the top wires, replaced both under the chassis, using red 18ga wire from a fluorescent ballast, TFFN insulation - 600 volts. , so I robbed one from the other chassis I have to do. Wish I had a spare chassis now.After replacing the tube socket, I plugged in the tubes and powered up. Got a raster right away and set up purity, have a good color pic now but focus coil is at one end. I checked the 66 meg resistor and it was 54 Meg, close enough. The 4.7 Meg is now suspect. Ran out of time this morning, just like Xmas but its my birthday and this was a treat so far. I recall giving the same treatment, though it was already working, to a friend's CTC16 way back in the 80s and it was a great watcher after that!
__________________
"When resistors increase in value, they're worthless" -Dave G |
| Thread Tools | |
| Display Modes | |
|
|