Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 09-08-2016, 08:21 PM
Zenith6S321's Avatar
Zenith6S321 Zenith6S321 is offline
VideoKarma Member
 
Join Date: Aug 2010
Location: Charleston, West Virginia
Posts: 303
Installing the manual RF-IF output level DPDT toggle switch requires moving wires from the RF-IF switch to the DPDT switch. Here is how
1. Locate the back of the RF-IF switch. It looks like this


2. You need to wire the DPDT toggle switch like this


3. Remove these wires and label them. ONE AT A TIME.


4. Put some heavy tape (I used red duct tape) onto the front panel between the AUDIO and the RF-IF LEVEL switches


5. Put some tape on the back to catch the drill shavings


6. GENTLY drill a hole for the DPDT switch
Attached Images
File Type: jpg RF-IFswitchwires.jpg (71.1 KB, 224 views)
File Type: jpg SwitchDiagram.jpg (142.6 KB, 222 views)
File Type: jpg LabelWires.jpg (88.0 KB, 182 views)
File Type: jpg FrontTape.jpg (67.1 KB, 213 views)
File Type: jpg BackTape.jpg (88.9 KB, 214 views)
File Type: jpg HoleDrilled.jpg (56.6 KB, 219 views)

Last edited by Zenith6S321; 09-23-2016 at 07:30 AM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:00 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.