![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
I have great confidence on anything tube. But on solid state stuff, if differs. I have great confidence on scientific solid state stuff. It generally has single digital power supplies, and an analog +- 12 or 15 volt dual tracking supply. AND ... its generally not filled with unobtanium parts nor fragile circuit boards. High voltage supplies are always quite separate. And the big good point is that global feedback is generally very simple and easy to understand. Luckily I never had a 3000+ volt supply go bad. Not so for my new Indextron ... a nightmare of strange interconnected supplies, with feedback between them, un-understandable feedback in both H/V sync and index systems, and unobtanium parts galore. And the killer -- several unobtanium coils and tranfsormers in the the area that needs to be ultrasonic washed to get off the corrosive goo. So I sent it to the experienced specialist. |
|
#2
|
||||
|
||||
|
Quote:
Congratulations on obtaining your new Indextron. By the above quote, I am assuming you sent your Indextron to Andy. He did a great job on my two Indextrons. It is usually bad leaking caps problems with Indextrons. They were defective in nearly all Indextrons. It's been 6 and 5 years since Andy's repair and they both look as good as ever. I see no problem with having someone help when in doubt or inexperienced. You can learn from others by asking questions on what they did and how they did it.
__________________
Last edited by etype2; 08-31-2016 at 11:46 AM. Reason: Correction: 6 and 5 years, not 3 |
|
#3
|
||||
|
||||
|
Quote:
Quote:
|
|
#4
|
||||
|
||||
|
I've farmed out early color sets to other restorers simply because I've come to loathe working on early color. In turn, I've worked on more than a few brute-force HV sets for people too afraid (and for good reason) to work on them. At the end of the day it doesn't matter who the hell is doing the restoration work, so long as everyone is happy with the end result.
Your CT-100 is looking good Dave! Perhaps the red gun will wake up a bit with more use. I had a CTC-9 or 10 with a dead looking green gun that sprang back to life after 4 or 5 hours of use.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|