![]() |
|
|
|
#1
|
|||
|
|||
|
Quote:
Good luck, please make sure to document and post pictures. |
|
#2
|
|||
|
|||
|
Just to let everyone know, this set uses a 14CP4 CRT. It is a model 14R12 with a 20T1 chassis. Brown Bakelite cabinet.
|
|
#3
|
|||
|
|||
|
Quote:
This model doesn't use the audio output, as the voltage divider, like the 20Z1, a year earlier.
|
|
#4
|
||||
|
||||
|
I think you said 14BP4 in the classifieds post. Looking at the specs for 14CP4 and 14BP4 they look very close. Both spherical faces I believe.
|
|
#5
|
|||
|
|||
|
Quote:
It's probably 50 years ago, since I bought and installed one.
|
| Audiokarma |
|
#6
|
|||
|
|||
|
Today I started on the restoration for reals. I again checked the CRT on my BK 467. All I could get is a .45 reading. Still into the red even after about a half hour. I then decided to try it in my 16" AMC TV. So I swapped the CRT's and the 14" gives a decent picture. Now it was a little out of focus, but it was bright enough! My shop is well lit and the picture showed up real good with all the lights on. So I'm proceeding wit the restoration.
Next up is to check the transformers and coils etc.
Last edited by Crist Rigott; 12-03-2016 at 10:04 PM. |
|
#7
|
|||
|
|||
|
Earlier in this thread, there was a discussion on the CRT. It looks like it is a replacement. It has not been rebuilt. It is a CBS Hytron 14CP4. I couldn't read the date code.
This CRT has 2 getters. One on each side of the neck between 2 bands of the internal aquadag. I'm including some pictures of the label and what the getters look like.
Last edited by Crist Rigott; 12-03-2016 at 10:03 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|